Description
Heiman Wireless Interlinked Heat Alarm
Features
- 10-year sealed lithium battery.
- Sound level 85db at 3 meters.
- Connection to up to 40 alarms.
- Operating light (LED) Flashes approximately every 53 seconds, confirming the heat alarm is powered and working normally.
- Alarm Pause (Hush Mode) Silence your heat alarm by momentarily pressing the test button when non-emergency smoke causes a nuisance alarm. The alarm will automatically reset after 90 seconds.
- Low Battery Warning – The alarm will beep every 53 seconds when the battery is low.
- Test Function – Press the test button periodically to check and confirm that the heat alarm is working normally.
- Audible and visible alarm signals – When detected heat reaches the alarm threshold of the smoke alarm, a red light will flash quickly, and the buzzer will issue loud and quick beep sounds.
- Easy installation fixings supplied, 360°Removable without angle limitation.
- Ceiling installation.
- Automatic temperature compensation.
- Meets EN14604 standard.
- Supports 433Mhz or 868Mhz wireless.
- Compatible with HM-1RC Heiman Wireless Interconnect Remote Control.
- Voltage: DC3V CR123 lithium battery Standby current: ≤10uA.
- Alarm current: trigger alarm current 150mA Sensor: NTC heat-sensitive device.
- Alarm temperature: 57 degrees. Mute time:90 seconds.
- Material: flame retardant ABS.
- Network distance: 150m.
- Working temperature: -10 ℃ ~ +50 ℃.
- Working Humidity: ≤95% RH (no condensation).
- Product size: φ101.6mm * 35mm.
-226x226.jpg)
