Home/Products/Consumables/Fire Safety/Heiman Wireless Interlinked Smoke Alarm HM2SA-1W-T
Go Back
2022012493319li (1) zoom


2022012493319li (1)

Heiman Wireless Interlinked Smoke Alarm HM2SA-1W-T

SKU: HM2SA-1W-T Categories: ,


Heiman Wireless Interlinked Smoke Alarm HM2SA-1W-T

Features & Specification

  • ‍10-year sealed lithium battery.
  • Sound level 85db at 3 meters.
  • Connection to up to 40 alarms.
  • Operating light (LED) flashes approximately every 53 seconds, confirming the smoke alarm is powered and working normally.
  • Alarm Pause (Hush Mode) – Silence your smoke alarm by momentarily pressing the test button when non-emergency smoke causes a nuisance alarm. The red light flashes every 10 seconds to remind you that the smoke alarm has been silenced. The alarm will automatically reset after 10 minutes and sound the alarm if combustion particles are still present.
  • If the smoke alarm triggers, the red light flashes, which makes it easy to identify. All other interlinked alarms flash green.
  • Low Battery Warning – The alarm will beep every 53 seconds when the battery is low.
  • Test Function – Press the test button periodically to check and confirm that the smoke alarm is working normally.
  • Audible and visible alarm signals – When detected smoke reaches the alarm threshold of the smoke alarm, a red light will flash quickly, and the buzzer will issue loud and quick beep sounds.
  • Easy installation fixings supplied, 360°Removable without angle limitation.
  • Ceiling or wall installation.
  • Meets EN14604 standard.
  • Supports 433Mhz or 868Mhz wireless.
  • ‍Compatible with HM-1RC Heiman Wireless Interconnect Remote Control.
  • Voltage:DC3V CR123A lithium battery.
  • Warranty: 10 years.
  • Network distance: 150m.
  • Working Temperature: -10℃~+50℃.
  • Working Humidity: ≤95% RH (no condensation).
  • Product size: φ86*34.5mm.